Mains - two channel or H/T

Not looking for a proprietary design? We have hundreds of pre-engineered systems that have gone through the same steps as our Professional designs.

All we need to start is a brief summary of your needs, design goals, and product preferences. From there we can offer a wide assortment of designs that will fit your requirements.

We have proven systems ranging from Silver Flute, to Peerless, SEAS, Accuton, and Scan Speak to name a few. In other words, we have a system for you to fit within your budget.

Take them anyway you like, fully assembled and tested, or in parts/kit form.


Cabinets - Please call. We are finalizing brand new models, all made in the USA featuring real wood veneers, Baltic Birch bracing and cosmetics. We should have a size to meet most needs.

Active Subwoofers

Because the subwoofer needs only to produce deep bass with low distortion, we’ve settled on a few designs that we know will exceed your expectations.

Standard active subwoofers feature very high excursion units with XBL, split gap technology and use a minimum of 300W A/AB amplifiers:

MA-SW10, 10” subwoofer requiring less than 1.5cu ft sealed enclosure.
MA-SW12, 12” subwoofer requiring less than 2.5 cu ft sealed enclosure.

Motion Feedback Controlled active subwoofers are your best choice for state of the art systems. Benefits:

• Deep bass (-3dB @ 15Hz), relatively small sealed box
• Parametric EQ for room integration
• Efficient amplification with voice coil sensing unit. Others need over 1000W to obtain the same results.

MA-MFC12, 12” subwoofer requiring 2 cu ft sealed
MA-MFC15, 15” subwoofer requiring 3 cu ft sealed.