#10-32 x 1″ long, Low Head, Cap Screw.
The decorative, black, round head has more holding power than traditional caps screws. Use these if you plan on removing drivers often or just for the decorative head. A bit bigger than the #8 – best used for woofers and subwoofers. The corresponding threaded insert won’t “fall out” like traditional “T” nuts. Drill a 7/32″ pilot hole. Use a 4mm (5/32″) hex key to tighten.
- 10-32 Thread
- 1″ Long (48mm)
- 7/32″ Pilot Hole
- 5/32″ Hex Key (4mm)
Pilot hole dia will vary depending on the material used. Drill practice holes in scrap material for best results.