MDL 3.9uf XPP Metallized Polypropylene Film Capacitor, Non-Inductive
A low-cost capacitor that actually sounds good. Much better than those “other” yellow end caps. Or, if you are a non-believer in capacitor difference these are definitely for you!
We have these in a value range that will fit almost any design without breaking the bank.
We often use these for our entry-level kits.
- size 16mm diameter x 31mm length
- 5% tolerance
- 0.1% dissipation factor
Capacitance tolerance：± 10%(K) or ± 5%(J) or ± 2.5% (H) or ± 1%(F) at 1K HZ
Dissipation factor：Max 0.001 (0.1%) at 1KHZ.
Temperature range：- 40 ºC to +105 ºC
Capacitance drift： Max. 2% cycled through the operating temp. Range.
INSULATING RESISTANCE： C ≤ 0.33μF， I.R. ≥ 9000 Mega-Ohm (at 20 ºC, 1min) C > 0.33μF , I.R ≥ 7500 Mega-Ohm (at 20 ºC, 1min)
LIFE TEST：150% of rated working voltage at 105 ºC for 1,000 hours.
HUMIDITY：Caps Max. 5% D.F. Max 2% I.R. Min 70% under R.H. 95% @40 ºc 1,000 hours.
PULL TEST： Will sustain 2 kgs steady pull in the direction of lead egress and 1 kg steady pull at any 90-degree angle for 60 seconds. After the test, the capacitor shall show no evidence of damage and pass all electrical requirements.